|
 |
CHIORINO manufactures profiles,
guides and sidewalls
from special PVC and polyurethane compounds in various
Sh.A hardnesses giving high flexibility and resistance to
abrasion and oils.
They have been designed to be perfectly compatible
with the conveyor belt covers and are fitted by means of
different vulcanising systems which guarantee a perfect
and long lasting bond using equipment normally available
in all the fabrication workshops of CHIORINO.
- Standard colours: see production programs. Special
colours can be supplied on request.
- Minimum pulley diameters: the values of the
minimum pulley diameters are meant as a guide only and they
are based on a 2 mm thick belt, working at room temperature.
The minimum
pulley values which refer to K, KN and S profiles are valid
only when fitted on the
driving surface of the belt.
- In case of back-flexing (for K and S guides)
diameters have to be increased by 50%.
- It is not advisable to fit KN guides longitudinally on the
conveying surface. For the fitting of K, KN e S profiles please
contact the
CHIORINO Technical Support.
Last updating: 5th october 2007
|
|
|
