|
|
 |
CHIORINO offers a wide choice of jointing
systems, designed to match all the application needs. Here below
we summarise the types of joints that can be selected to make CHIORINO
belts endless:
OVERLAP joints
(1) |
This system is applicable to thermoplastic
polyurethane belts. |
|
FINGER joints
(2, 3, 4) |
Traditional splicing method that guarantees
thickness and alignment evenness:
- MICRO Z: fast
joint for conveyor and transmission
belts;
- SINGLE Z: it offers the maximum of
flexibility. Ideal on fixed knife edges. Seam sealing
foil can be used to increase strength and for heavy applications;
- DOUBLE Z: it provides high strength
and can be used in alternative to single Z.
|
|
SKIVED
(5) |
Special method for polyamide transmission belts
and some conveyor belts for special applications as alternative
to the traditional finger joints. |
|
STEP
(6) |
Special method for some belts and for special
applications as alternative to the traditional finger joints. |
|
PLASTIC FASTENER
(7) |
Non metallic fastener made of polyester
fabric and spiralace. It has a high resistance to chemicals,
guarantees flexibility and a short replacement time. It is
FDA approved. It is suitable for over 16 mm diameter pulleys
and in particular in those applications involving X-Ray scanners
or metal detectors.
|
|
METAL FASTENERS
(8, 9, 10,11) |
Mechanical fasteners
suitable in those situations where ease and speed of
fitting is required. They are available both in
galvanized and stainless steel, in the following types:
- M/G:suitable for every belt
type, in particular for airport systems, for food
industry and for textile industry;
- M/M:suitable for every belt
type and application. They do not need equipment
for their application;
- M/SL:suitable for every belt
type and application. They do not need equipment
for their application;
- M/SW:suitable for belts thicker
than 2 mm. They guarantee superior strenght. They
are in particular used in the agricultural industry.
|
|
|
Important!
1 - The jointing systems described above must be related to the belt
type and the working conditions.
2 - The Technical Support is available, even on site, to provide
the necessary instructions in order to correctly join CHIORINO belts. |
Last updating: 14th march 2008
|
|
|
