www.chiorino.it

Site map | Search | Home

Products > Conveyor and process belts > Production program POLYURETHANE

Back	Explanation of type Designation	Surface pattern

PRODUCTION PROGRAM POLYURETHANE - ISSUE 01/2012
Select: ALL - ELASTIC BELTS - 1 POLYESTER FABRIC - 2 POLYESTER FABRICS - 3 POLYESTER FABRICS

Type	FDA 10/2011/EC	Perm. antist.	LdB	Colour conveying surface	Tot. thick. [mm]	Weight [kg/m2]	Min. Diam. (1)	Pull 1% elong. [N/mm]	Pull 8% elong. [N/mm]	Max. adm. elong. pull [N/mm]	Temp. min [°C]	Temp. max [°C]	Compar. coeff. of friction	Max. prod. width. [mm]

1M3 U0-U2 HP blue A	x	x		blue	0,80	0,8	knife edge	4		4	-30	110	MF	2000
1M5 U0-U2 A	x	x		green	0,70	0,8	knife edge	5		5	-20	100	MF	2000
1M5 U0-U2 W A	x	x		white	0,70	0,8	knife edge	5		5	-20	100	LF	2000
1M5 U0-U2 W A LF VL	x	x		white	0,70	0,8	knife edge	5		5	-20	100	LF	1500
1M5 U0-U2 D W A	x	x		white	0,70	0,7	knife edge	5		5	-30	100	HF	2000
1M5 U0-U2 HP blue S A	x	x		blue	0,70	0,7	knife edge	5		5	-30	110	HF	2000
1M5 U0-U2 HP W A	x	x		white	0,70	0,8	knife edge	5		5	-30	110	MF	2000
1M5 U0-U2 HP W S A	x	x		white	0,70	0,8	knife edge	5		5	-30	110	HF	2000
1M5 U0-U2 HP VL blue A	x	x		blue	0,70	0,8	knife edge	5		5	-30	110	MF	2000
1M5 U0-U2 PN yellow	x			yellow	1,10	0,9	knife edge	5		5	-20	100	HF	2000
1T6 U0-U2 HP W A	x	x		white	0,80	0,8	knife edge	6		6	-30	110	MF	2000
1M6 U0-U5 FL	x	x	x	green	1,00	1,0	10	6		6	-20	100	MF	2000
1M6 U3-U3 FL	x	x		green	1,20	1,3	10	6		6	-20	100	MF	2000
1M6 U5-U5 FL	x	x		green	1,60	1,9	20	6		6	-20	100	MF	2000
1M12 U0-U3 HP PN N S		x	x	black	1,50	1,6	knife edge	8		12	-30	110	HF	2000
ST06	x	x		green	0,60	0,6	10	4		4	-30	100	MF	2000

(1) Minimum roller diameter is dependent on the joint recommended by CHIORINO. The value of the back-flexing diameter is available from the product data sheet.

The data given are obtained under controlled conditions of 50% relative humidity at +23 degrees centigrade. Alterations can be made without prior notice as may be found necessary.