|
|  |
CHIORINO offers a wide choice of
jointing systems, designed to match all the application needs.
Here below
we summarise the types of joints that can be selected to make CHIORINO
belts endless:
OVERLAP joints
(1) |
This system is applicable to thermoplastic
polyurethane belts. |
|
FINGER joints
(2, 3, 4) |
Traditional splicing method that guarantees
thickness and alignment evenness:
- MICRO Z: fast joint for conveyor and
transmission belts;
- SINGLE Z: it offers the maximum of
flexibility. Ideal on
fixed knife edges. Seam sealing foil can be used to increase
strength and for heavy applications;
- DOUBLE Z: it provides high strength and can be used
in alternative to single Z.
|
|
SKIVED
(5) |
Special method for polyamide transmission belts
and some
conveyor belts for special applications as alternative to the
traditional finger joints. |
|
STEP
(6) |
Special method for some belts and for special
applications as
alternative to the traditional finger joints. |
|
METAL FASTENERS
(7, 8, 9, 10) |
Mechanical fasteners
suitable in those situations where ease
and speed of fitting is required. They are available
both in
galvanized and stainless steel, in the following types:
- M/G:suitable for every belt type,
in particular for airport
systems, for food industry and for textile industry;
- M/M:suitable for every belt type
and application. They do
not need equipment for their application;
- M/SL:suitable for every belt type
and application. They do not need equipment for their
application;
- M/SW:suitable for belts thicker
than 2 mm. They guarantee superior strenght. They
are in particular
used in the agricultural industry.
|
|
|
PLASTIC FASTENERS
(11) |
Non metallic fastener made of polyester fabric
and spiralace. It has a high resistance to chemicals, guarantees
flexibility and a short replacement time. It is FDA approved.
It is suitable for over 16 mm diameter pulleys and in particular
in those applications involving X-Ray scanners or metal detectors. |
|
Important!
1 - The jointing systems described above must be related to
the belt type and the working conditions.
2 - The Technical Support is available, even on site, to provide
the necessary instructions in order to correctly join CHIORINO
belts. |
Date of last amendment: 5th october 2007 |
|
|
